How to Sew a Catch Stitch by Hand

If you want to know how to sew a catch stitch by hand, you are learning one of the most useful hand stitches in sewing. A catch stitch, also called a herringbone stitch, is a crossed stitch that holds a hem or a lining in place while letting it move a little, which is exactly what a hem needs. It is strong, it is flexible, and when it is done well it is almost invisible from the right side.

I use a catch stitch on wool skirts, on jacket linings, and on any hem where I want the fabric to drape naturally instead of sitting stiffly. A machine stitched hem can look hard on a soft wool, and a slip stitch can be too delicate for a heavy fabric, but a catch stitch sits in between: firm enough to hold, flexible enough to move, and pretty enough to admire on the inside. It is also a wonderfully calming stitch to sew by hand in the evening.

This guide covers what a catch stitch is, when to use it, how to choose thread and needle, how to form the crossed stitches step by step, and how to keep them even and invisible. Practice on a scrap hem first, and your next hand finished hem will look like it was done by someone who sews for a living.

What a Catch Stitch Is and When to Use It

A catch stitch is a hand stitch that forms a row of small crosses on the wrong side of the fabric, with only tiny stitches showing on the right side. You work from left to right, taking a small stitch in the hem fold, then a small stitch in the garment above it, crossing the thread between them. The crossed threads create a flexible join, so the hem can move with the fabric instead of pulling tight.

Use a catch stitch for hems on wool, tweed, and other fabrics that need to drape, and for attaching linings to hems, where the lining needs to move independently of the shell. It is also good for holding facings in place and for tacking interfacing where a machine stitch would show. It is less suited to very lightweight fabrics, where the stitches may show, and to children’s clothes, where a stronger machine hem is better. My guide to essential hand stitches covers the other hand stitches you will use alongside it.

Close view of crossed catch stitches on the inside of a hem

Thread, Needle, and Preparation

Choose a thread that matches your fabric in colour and weight, and use a single strand, not doubled, so the stitches stay fine and flexible. A sharps needle in size 8 or 9 is a good choice for most fabrics, and a slightly longer needle helps you take even stitches. Knot the end of the thread, or leave a small tail tucked under the first stitches, and work with a length of thread no longer than your forearm, so it does not tangle.

Prepare the hem by pressing it up to the finished length and pinning it in place, with the pins at right angles to the hem so you can remove them as you sew. Work with the garment wrong side up and the hem facing you, so you can see both the hem fold and the garment above it. Good light matters for hand stitching, so sit near a window or a lamp, and take your time. Hand sewing is slow sewing, and rushing it shows.

Forming the Catch Stitch Step by Step

Start at the right end of the hem, or the left if you are left handed, and secure the thread with a small backstitch inside the hem fold. Take a small stitch from right to left in the garment fabric, just above the hem edge, catching only one or two threads so the stitch barely shows on the right side. Then take a small stitch from right to left in the hem fold, a little to the left of the first stitch, and pull the thread through, leaving it loose enough to form a diagonal cross.

Repeat the pattern: a small stitch in the garment, a small stitch in the hem, always moving left, always crossing the thread. The stitches on the wrong side should form a neat row of crosses, like a row of little X shapes, and the stitches on the right side should be tiny dots, almost invisible. Keep the spacing even, about a quarter inch apart, and keep the tension loose enough that the hem can move, but firm enough that it does not sag.

Hand sewing a hem with a catch stitch on a sewing table

Keeping Stitches Even and Invisible

Even spacing is what makes a catch stitch look professional, so aim for consistency rather than speed. Mark a faint guideline with chalk if it helps, or use the edge of the hem fold as your guide. Take the same size bite of fabric each time, and check the right side every few inches to make sure the stitches are tiny and the fabric is not puckering.

If the stitches show too much on the right side, you are catching too many threads in the garment fabric, so take a smaller bite. If the hem sags, your stitches are too far apart or too loose, so space them closer together. If the hem puckers, your thread is too tight, so loosen your tension and let the crossed threads do the holding. A good catch stitch feels firm but flexible when you gently pull the hem, and it lies flat when you press it. My guide to sewing a blind hem covers a related invisible hem for lighter fabrics.

Using a Catch Stitch on Linings and Facings

A catch stitch is the classic way to attach a lining to a hem, because it lets the lining and the shell move independently. Fold the lining hem up, pin it to the garment hem, and catch stitch the lining to the garment hem fold, taking small stitches in both layers. The lining should hang a little shorter than the shell, so it does not peek out below the hem, and the catch stitch should be loose enough to let the two layers move.

The same method holds a facing in place at the shoulder or the neckline, and it tacks a waistband lining to the waistband without stitching through to the right side. When you finish, press the hem gently from the wrong side with a press cloth, and let it cool before you move the garment. A hand finished hem pressed well looks better than a machine hem on many fabrics, and it is a detail that marks a garment as properly made. For trousers, my guide to hemming trousers shows where a catch stitch fits best.

A catch stitch holding a jacket lining in place at the hem

Frequently Asked Questions

What is a catch stitch used for?
It holds hems and linings in place while letting them move, so it is ideal for wool skirts, jacket linings, and facings. The crossed stitches are flexible, strong, and almost invisible from the right side.

Is a catch stitch visible from the outside?
Only tiny dots should show, if anything. Take a very small bite of the garment fabric, just one or two threads, and keep the tension loose so the fabric does not pucker.

How far apart should catch stitches be?
About a quarter inch apart, evenly spaced. Closer stitches hold better on heavy fabric, while wider spacing is fine on light fabric that does not need much support.

Can I use a catch stitch on a lining?
Yes, it is the classic lining stitch. It attaches the lining to the hem while letting the two layers move independently, which stops the lining from pulling the shell out of shape.

What thread should I use for a catch stitch?
Use a single strand of matching thread in a weight that suits your fabric. A single strand keeps the stitches fine and flexible, while a doubled thread would be too bulky and stiff.

A catch stitch is a small skill with a large payoff, and it is one of those hand stitches that separates a good hem from a great one. Choose matching thread, take small even bites, cross the threads loosely, and press the finished hem well. Your next wool skirt or lined jacket will hang beautifully, move freely, and look finished inside and out. Keep practicing on scraps, because even spacing comes with repetition, and your hands will learn the rhythm faster than you expect. If you are hemming by machine as well, my guide to sewing a blind hem is a useful companion.

June Carter

Written by June Carter

I am June, a sewing enthusiast who loves turning simple fabric into things people actually use. I test every technique and product I write about at my own machine before it lands here.

Leave a Comment